Characteristics of Carbon Steel Peach Fence

The carbon steel peach post fence is made of q235 low carbon steel cold drawn wire through hot galvanizing, instant welding steel wire galvanized surface high adhesion treatment, electrostatic spray molding and other production processes, and the product warranty is more than 10 years. Antiseptic. The mesh adopts borderless welding method, which is convenient for transportation and installation. The terrain has strong adaptability. The connection position with the post can be adjusted up and down with the ground. Because the peach-type column fence mesh is installed with four horizontal bending ribs, the net The surface strength increases significantly. At present, it is widely used as fence in fenced field development area of railway enclosed living area.

Peach post fence's mesh uses a unique tomahawk design to make the product's overall lines smoother. The groove design of the column, no need for any connecting parts between the column and the mesh, it becomes safer and can not be removed. The column has a variety of chassis, base, hanging and other styles to meet your different site installation. Barbed wire and barbed ring can be installed on the top of the column to increase the safety of the protective field.

Peach Post Fence

Surface treatment process:

Hot dip galvanizing process of warehouse peach post fence: hot dip plating of steel is the process of infiltration and melting of molten zinc and iron and diffusion growth of transition layer. There are two main methods of hot dip galvanizing of steel, namely flux method and protective gas reduction method. The shielding gas reduction method is the most widely used method for continuous hot-dip zinc in modern broadband steel. It is used for continuous production, but the equipment investment is large, the control is more complicated, and it is suitable for professional large-scale production. The typical process is generally called Sendzimir. (T. Sendzimir) method. The hot dip galvanizing process of highway guardrail board generally adopts flux method according to its characteristics.

The biggest feature of the flux method hot-dip galvanizing technology is that the pre-treated workpiece to be plated is subjected to flux treatment before hot-dip galvanizing to prevent the plated parts from being oxidized before entering the zinc solution, and also to prevent the zinc liquid surface from entering the plating Zinc oxide is produced at the entrance of the zinc tank. In the process, the flux method hot dip plating will also ask for the development of scale and automation. Through hints on the microstructure of the coating and the growth mechanism of the surface layer, many new theories have been constructed. The main purpose of the current application of galvanizing technology is to reduce zinc consumption, improve appearance quality, reduce labor intensity, improve working conditions, reduce pollution and emissions, and improve efficiency.

The installation of peach-shaped column fences is different from other fences. Such as wavy fences, sports court fences, railway fences, highway protection nets, etc. are installed after the column is installed, and then connected to the mesh. The installation of peach-shaped column fence can not be installed like this. If the post is pressed first, the mesh cannot be hooked.